DNS Server Config



 DNS Server Config On CentOS 7

DNS, stands for Domain Name System, translates hostnames or URLs into IP addresses. For example, if we type www.unixmen.com in browser, the DNS server translates the domain name into its associated ip address. Since the IP addresses are hard to remember all time, DNS servers are used to translate the hostnames like www.unixmen.com to 173.xxx.xx.xxx. So it makes easy to remember the domain names instead of its IP address.
This detailed tutorial will help you to set up a local DNS server on your CentOS 7 system. However, the steps are applicable for setting up DNS server on RHEL and Scientific Linux 7 too.


DNS Server Installation

Scenario

For the purpose of this tutorial, I will be using three nodes. One will be acting as Master DNS server, the second system will be acting as Secondary DNS, and the third will be our DNS client. Here are my three systems details.

Primary (Master) DNS Server Details:

Operating System     : CentOS 7 minimal server
Hostname             : masterdns.unixmen.local
IP Address           : 192.168.1.101/24

Secondary (Slave) DNS Server Details:

Operating System     : CentOS 7 minimal server
Hostname             : secondarydns.unixmen.local
IP Address           : 192.168.1.102/24

Client Details:

Operating System     : CentOS 6.5 Desktop  
Hostname             : client.unixmen.local
IP Address           : 192.168.1.103/24

Setup Primary (Master) DNS Server

Install bind9 packages on your server.
yum install bind bind-utils -y

1. Configure DNS Server

Edit ‘/etc/named.conf’ file.
vi /etc/named.conf
Add the lines as shown in bold:

//
// named.conf
//
// Provided by Red Hat bind package to configure the ISC BIND named(8) DNS
// server as a caching only nameserver (as a localhost DNS resolver only).
//
// See /usr/share/doc/bind*/sample/ for example named configuration files.
//

options {
    listen-on port 53 { 127.0.0.1; 192.168.1.101;}; ### Master DNS IP ###
#    listen-on-v6 port 53 { ::1; };
    directory     "/var/named";
    dump-file     "/var/named/data/cache_dump.db";
    statistics-file "/var/named/data/named_stats.txt";
    memstatistics-file "/var/named/data/named_mem_stats.txt";
    allow-query     { localhost; 192.168.1.0/24;}; ### IP Range ###
    allow-transfer{ localhost; 192.168.1.102; };   ### Slave DNS IP ###

    /* 
     - If you are building an AUTHORITATIVE DNS server, do NOT enable recursion.
     - If you are building a RECURSIVE (caching) DNS server, you need to enable 
       recursion. 
     - If your recursive DNS server has a public IP address, you MUST enable access 
       control to limit queries to your legitimate users. Failing to do so will
       cause your server to become part of large scale DNS amplification 
       attacks. Implementing BCP38 within your network would greatly
       reduce such attack surface 
    */
    recursion yes;

    dnssec-enable yes;
    dnssec-validation yes;
    dnssec-lookaside auto;

    /* Path to ISC DLV key */
    bindkeys-file "/etc/named.iscdlv.key";

    managed-keys-directory "/var/named/dynamic";

    pid-file "/run/named/named.pid";
    session-keyfile "/run/named/session.key";
};

logging {
        channel default_debug {
                file "data/named.run";
                severity dynamic;
        };
};

zone "." IN {
    type hint;
    file "named.ca";
};

zone "unixmen.local" IN {
type master;
file "forward.unixmen";
allow-update { none; };
};
zone "1.168.192.in-addr.arpa" IN {
type master;
file "reverse.unixmen";
allow-update { none; };
};

include "/etc/named.rfc1912.zones";
include "/etc/named.root.key";

2. Create Zone files

Create forward and reverse zone files which we mentioned in the ‘/etc/named.conf’ file.

2.1 Create Forward Zone

Create forward.unixmen file in the ‘/var/named’ directory.
vi /var/named/forward.unixmen
Add the following lines:
$TTL 86400
@   IN  SOA     masterdns.unixmen.local. root.unixmen.local. (
        2011071001  ;Serial
        3600        ;Refresh
        1800        ;Retry
        604800      ;Expire
        86400       ;Minimum TTL
)
@       IN  NS          masterdns.unixmen.local.
@       IN  NS          secondarydns.unixmen.local.
@       IN  A           192.168.1.101
@       IN  A           192.168.1.102
@       IN  A           192.168.1.103
masterdns       IN  A   192.168.1.101
secondarydns    IN  A   192.168.1.102
client          IN  A   192.168.1.103

2.2 Create Reverse Zone

Create reverse.unixmen file in the ‘/var/named’ directory.
vi /var/named/reverse.unixmen
Add the following lines:
$TTL 86400
@   IN  SOA     masterdns.unixmen.local. root.unixmen.local. (
        2011071001  ;Serial
        3600        ;Refresh
        1800        ;Retry
        604800      ;Expire
        86400       ;Minimum TTL
)
@       IN  NS          masterdns.unixmen.local.
@       IN  NS          secondarydns.unixmen.local.
@       IN  PTR         unixmen.local.
masterdns       IN  A   192.168.1.101
secondarydns    IN  A   192.168.1.102
client          IN  A   192.168.1.103
101     IN  PTR         masterdns.unixmen.local.
102     IN  PTR         secondarydns.unixmen.local.
103     IN  PTR         client.unixmen.local.

3. Start the DNS service

Enable and start DNS service:
systemctl enable named
systemctl start named

4. Firewall Configuration

We must allow the DNS service default port 53 through firewall.
firewall-cmd --permanent --add-port=53/tcp
firewall-cmd --permanent --add-port=53/udp

5. Restart Firewall

firewall-cmd --reload

6. Configuring Permissions, Ownership, and SELinux

Run the following commands one by one:
chgrp named -R /var/named
chown -v root:named /etc/named.conf
restorecon -rv /var/named
restorecon /etc/named.conf

7. Test DNS configuration and zone files for any syntax errors

Check DNS default configuration file:
named-checkconf /etc/named.conf
If it returns nothing, your configuration file is valid.
Check Forward zone:
named-checkzone unixmen.local /var/named/forward.unixmen
Sample output:
zone unixmen.local/IN: loaded serial 2011071001
OK
Check reverse zone:
named-checkzone unixmen.local /var/named/reverse.unixmen 
Sample Output:
zone unixmen.local/IN: loaded serial 2011071001
OK
Add the DNS Server details in your network interface config file.
vi /etc/sysconfig/network-scripts/ifcfg-enp0s3
TYPE="Ethernet"
BOOTPROTO="none"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_FAILURE_FATAL="no"
NAME="enp0s3"
UUID="5d0428b3-6af2-4f6b-9fe3-4250cd839efa"
ONBOOT="yes"
HWADDR="08:00:27:19:68:73"
IPADDR0="192.168.1.101"
PREFIX0="24"
GATEWAY0="192.168.1.1"
DNS="192.168.1.101"
IPV6_PEERDNS="yes"
IPV6_PEERROUTES="yes"
Edit file /etc/resolv.conf,
vi /etc/resolv.conf
Add the name server ip address:
nameserver      192.168.1.101
Save and close the file.
Restart network service:
systemctl restart network

8. Test DNS Server

dig masterdns.unixmen.local
Sample Output:
; <<>> DiG 9.9.4-RedHat-9.9.4-14.el7 <<>> masterdns.unixmen.local
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 25179
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 2, ADDITIONAL: 2

;; OPT PSEUDOSECTION:
; EDNS: version: 0, flags:; udp: 4096
;; QUESTION SECTION:
;masterdns.unixmen.local.    IN    A

;; ANSWER SECTION:
masterdns.unixmen.local. 86400    IN    A    192.168.1.101

;; AUTHORITY SECTION:
unixmen.local.        86400    IN    NS    secondarydns.unixmen.local.
unixmen.local.        86400    IN    NS    masterdns.unixmen.local.

;; ADDITIONAL SECTION:
secondarydns.unixmen.local. 86400 IN    A    192.168.1.102

;; Query time: 0 msec
;; SERVER: 192.168.1.101#53(192.168.1.101)
;; WHEN: Wed Aug 20 16:20:46 IST 2014
;; MSG SIZE  rcvd: 125
nslookup unixmen.local
Sample Output:
Server:        192.168.1.101
Address:    192.168.1.101#53

Name:    unixmen.local
Address: 192.168.1.103
Name:    unixmen.local
Address: 192.168.1.101
Name:    unixmen.local
Address: 192.168.1.102
Now the Primary DNS server is ready to use.
It is time to configure our Secondary DNS server.

Setup Secondary(Slave) DNS Server

Install bind packages using the following command:
yum install bind bind-utils -y

1. Configure Slave DNS Server

Edit file ‘/etc/named.conf’:
vi /etc/named.conf
Make the changes as shown in bold.
//
// named.conf
//
// Provided by Red Hat bind package to configure the ISC BIND named(8) DNS
// server as a caching only nameserver (as a localhost DNS resolver only).
//
// See /usr/share/doc/bind*/sample/ for example named configuration files.
//
options {
listen-on port 53 { 127.0.0.1; 192.168.1.102; };
listen-on-v6 port 53 { ::1; };
directory "/var/named";
dump-file "/var/named/data/cache_dump.db";
        statistics-file "/var/named/data/named_stats.txt";
        memstatistics-file "/var/named/data/named_mem_stats.txt";
allow-query     { localhost; 192.168.1.0/24; };
.
.
.
.
zone "." IN {
type hint;
file "named.ca";
};
zone "unixmen.local" IN {
type slave;
file "slaves/unixmen.fwd";
masters { 192.168.1.101; };
};
zone "1.168.192.in-addr.arpa" IN {
type slave;
file "slaves/unixmen.rev";
masters { 192.168.1.101; };
};
include "/etc/named.rfc1912.zones";
include "/etc/named.root.key";

2. Start the DNS Service

systemctl enable named
systemctl start named
Now the forward and reverse zones are automatically replicated from Master DNS server to ‘/var/named/slaves/’ in Secondary DNS server.
ls /var/named/slaves/
Sample Output:
unixmen.fwd  unixmen.rev

3. Add the DNS Server details

Add the DNS Server details in your network interface config file.
vi /etc/sysconfig/network-scripts/ifcfg-enp0s3
TYPE="Ethernet"
BOOTPROTO="none"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_FAILURE_FATAL="no"
NAME="enp0s3"
UUID="5d0428b3-6af2-4f6b-9fe3-4250cd839efa"
ONBOOT="yes"
HWADDR="08:00:27:19:68:73"
IPADDR0="192.168.1.102"
PREFIX0="24"
GATEWAY0="192.168.1.1"
DNS1="192.168.1.101"
DNS2="192.168.1.102"
IPV6_PEERDNS="yes"
IPV6_PEERROUTES="yes"
Edit file /etc/resolv.conf,
vi /etc/resolv.conf
Add the name server ip address:
nameserver      192.168.1.101
nameserver      192.168.1.102
Save and close the file.
Restart network service:
systemctl restart network

4. Firewall Configuration

We must allow the DNS service default port 53 through firewall.
firewall-cmd --permanent --add-port=53/tcp

5. Restart Firewall

firewall-cmd --reload

6. Configuring Permissions, Ownership, and SELinux

chgrp named -R /var/named
chown -v root:named /etc/named.conf
restorecon -rv /var/named
restorecon /etc/named.conf

7. Test DNS Server

dig masterdns.unixmen.local
Sample Output:
; <<>> DiG 9.9.4-RedHat-9.9.4-14.el7 <<>> masterdns.unixmen.local
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 18204
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 2, ADDITIONAL: 2

;; OPT PSEUDOSECTION:
; EDNS: version: 0, flags:; udp: 4096
;; QUESTION SECTION:
;masterdns.unixmen.local.    IN    A

;; ANSWER SECTION:
masterdns.unixmen.local. 86400    IN    A    192.168.1.101

;; AUTHORITY SECTION:
unixmen.local.        86400    IN    NS    masterdns.unixmen.local.
unixmen.local.        86400    IN    NS    secondarydns.unixmen.local.

;; ADDITIONAL SECTION:
secondarydns.unixmen.local. 86400 IN    A    192.168.1.102

;; Query time: 0 msec
;; SERVER: 192.168.1.102#53(192.168.1.102)
;; WHEN: Wed Aug 20 17:04:30 IST 2014
;; MSG SIZE  rcvd: 125
dig secondarydns.unixmen.local
Sample Output:
; <<>> DiG 9.9.4-RedHat-9.9.4-14.el7 <<>> secondarydns.unixmen.local
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 60819
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 2, ADDITIONAL: 2

;; OPT PSEUDOSECTION:
; EDNS: version: 0, flags:; udp: 4096
;; QUESTION SECTION:
;secondarydns.unixmen.local.    IN    A

;; ANSWER SECTION:
secondarydns.unixmen.local. 86400 IN    A    192.168.1.102

;; AUTHORITY SECTION:
unixmen.local.        86400    IN    NS    masterdns.unixmen.local.
unixmen.local.        86400    IN    NS    secondarydns.unixmen.local.

;; ADDITIONAL SECTION:
masterdns.unixmen.local. 86400    IN    A    192.168.1.101

;; Query time: 0 msec
;; SERVER: 192.168.1.102#53(192.168.1.102)
;; WHEN: Wed Aug 20 17:05:50 IST 2014
;; MSG SIZE  rcvd: 125
nslookup unixmen.local
Sample Output:
Server:        192.168.1.102
Address:    192.168.1.102#53

Name:    unixmen.local
Address: 192.168.1.101
Name:    unixmen.local
Address: 192.168.1.103
Name:    unixmen.local
Address: 192.168.1.102

Client Side Configuration

Add the DNS server details in ‘/etc/resolv.conf’ file in all client systems
vi /etc/resolv.conf
# Generated by NetworkManager
search unixmen.local
nameserver 192.168.1.101
nameserver 192.168.1.102
Restart network service or reboot the system.

Test DNS Server

Now, you can test the DNS server using any one of the following commands:
dig masterdns.unixmen.local
dig secondarydns.unixmen.local
dig client.unixmen.local
nslookup unixmen.local
That’s all about now. The primary and secondary DNS servers are ready to use.